100BASE-T1 Media Converter USB
The 100BASE-T1 Media Converter USB from Technica Engineering is a unique solution to expand your PC/Laptop with an additional network interface card, through the in-built USB-LAN chip. This MediaConverter enables a direct interaction with your 100BASE-T1 (a.k.a. BroadR-Reach ™, with 100 MBit/s full-duplex and 1x Unshielded Twisted Pair) device.
With its sleek design, the 100BASE-T1 MediaConverter USB is a space- and cost-efficient solution for a one point-to-point bi-directional physical layer conversion between automotive Ethernet 100BASE-T1 and USB LAN. An ideal solution for use cases where power supply distribution is crucial since with this device no external power supply is needed, as it consumes power by the same USB port. Its smaller dimensions and lighter weight make it portable and easy to install in test racks. The metal housing makes it robust with IP20 protection.
The device is coupled with drivers for Windows (32- and 64-bit) and Linux operating systems, for ease of use. This enables the user for easy configuration of the functionalities of the device, such as operation in master or slave mode, selection of multiple converters, among others. With the status LED, the operation of the device is transparent and aids the tester to detect Link up and data transmission. The device does the conversion on the Physical Layer hence no extra latency is observed with a reliable delivery of data.
It comes with Broadcom BCM89811 PHY and micro USB interface. No extra hardware complements are needed to interface the device with a PC or Laptop. The device can be coupled with any hardware or software tool that operates on standard USB LAN.
Thus, the 100BASE-T1 MediaConverter USB is the ideal solution for working quickly and efficiently with the new 100BASE-T1 technology without the hustle of extra- wiring, customized connectors, and vendor specific tools.
- Converts Broadcom 100BASE-T1 100 MBit/s full duplex 1x unshielded twisted pair (UTP) to USB-LAN
- Master/slave configuration through a windows tool (Linux driver available)
- Power requirement: 5V DC provided from USB 2.0
- Small size device as portable solution
- Status LEDs
- Automotive MQS connector included (100BASE-T1)
- Standard USB Connector
- Size: 60 x 42 x 19mm
More Information below